Dehydro
Dehydro Kit 3Dehydro Kit 2Dehydro Kit 1

Dehydro Emergency Pumping Kit

From £199.00 excl. VAT

Dehydro is an emergency pumping kit which comprises a pump, FloodSax and discharge hoses for defending a property from flooding. Designed to pump a flood down to a residue, the hoses have quick connections for fast deployment in an emergency. Ready assembled and supplied in a sturdy easy-carry case. Three versions available (Dehydro 1, 2 & 3) which are tailored to match all budgets and continuity of power supply.

Clear
SKU: DHYDRO Category:

Product Description

A Dehydro is an emergency pumping kit which has a powerful pump, 2x packs of FloodSax Door and discharge hoses for defending a property from flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment, but keep other flood protection products e.g. emergency grab bags, emergency meals etc.

Download Dehydro Brochure

Contents:

1 Pump: BPS100 or LSC1.4S or WX10

1 Phase 1 Hose Kit: 10 metres of 25mm (1”) non-kink hose c/w quick release connectors. For pumping near the property e.g. over window ledges, steps, walls, FloodSax, sandbags etc.

1 Phase 2 Hose Kit: 10 metres of 25mm (1”) lay-flat hose c/w quick release connectors. For pumping over flat surfaces e.g. over ground, away from the property.

2 Floodsax Door: 2 x door strip FloodSax and 8 x FloodSax Regular.

1 Easy Carry Case: including 1 x lid and 2 x fastening straps with ABS clips.

Dehydro 1: 1x BPS100, 230 volt submersible pump. This has a 100watt motor, weighs 2.5kgs (dry) and is supplied with a quick release hose connector, 10 metres of power cable and a plug for immediate use. It will pump approximately 40 litres per minute across 30 metres of level ground when using 25mm (1”) hose. No initial priming required before starting, it will pump water down to 3mm, but it must not run dry. For the full specification of this pump see page 2. Ideal for use with a generator or mains power (when connected and safe to use).

Dehydro 2: 1x LSC1.4, 230 volt submersible pump. This has a 480watt motor, weighs 12kgs (dry) and is supplied with a quick release hose connector, 10 metres of power cable and a plug for immediate use. It will pump approximately 70 litres per minute across 30 metres of level ground, when using 25mm (1”) hose. Initial priming of the pump with water is required before starting, it will pump water down to 1mm and can run dry for long periods (e.g. overnight) without damage. For the full specification of this pump see page 13. Ideal for use with a generator or mains power (when connected and safe to use).

Dehydro 3: 1x WX10 Honda engine driven pump, with a 1.5HP engine and weighs 6kgs (dry). This is supplied with a quick release discharge connector, a 4 metre, quick release suction hose, and a low level suction tool. It will pump approximately 80 litres per minute across 30 metres of level ground, when using 25mm (1”) hose. Initial priming of the pump with water is required before starting, It will pump water down to 3mm, but it must not run dry. For the full specification of this pump see page 79. Ideal for use when mains power is not available.